Communication Internationale

  1. Bechouche A., Sediki H., Ould Abdeslam D. & Haddad S. « Identification of Induction Motor at Standstill using Artificial Neural Network », The  36th Annual Conference of the IEEE Industrial Electronics Society (IECON 10), Arizona, USA, 7-10 Nov 2010, pp 2908-2913.
  2. M. S. Belkaid, K. Lagha, S. Maifi, et al. « Comparaison of physical and optical properties of Sn O2 and ZnO antireflective layers deposited by APCVD » European Energy Conference, 20-23 April 2010, Barcelona, Spain.
  3. K. Lagha, M.S. Belkaid et al. « Thin oxide in heterojunction solar cells » Photovoltaic Technical Conference, Thin solid films, 28-29 mai 2010 , Aix en province, France.
  4. H. SEDIKI, A. BECHOUCHE, D. OULD ABDESLAM and S.HADDAD, “Adaline-Based Mechanical Parameters Identification of induction motor”, ELECTRIMACS 2011, 6-8th June 2011, Cergy-Pontoise, France
  5. Bechouche A., Sediki H., Ould Abdeslam D. & Haddad S. « Identification of Induction Motor at Standstill using Artificial Neural Network », The 36th Annual Conference of the IEEE Industrial Electronics Society (IECON 10), Arizona, USA, 7-10 Nov 2010.
  6. Bechouche A., Sediki H., Ould Abdeslam D. & Haddad S. « Identification of Induction Motor at Standstill using Artificial Neural Network », The 36th Annual Conference of the IEEE Industrial Electronics Society (IECON 10), Arizona, USA, 7-10 Nov 2010.
  7. N. Benyahia, T. Rekioua, N. Benamrouche “Modelling and simulation of a stand- alone wind/photovoltaic/ Fuel cell system”. The third international renewable energy congress’IREC 2011’, December 20-22 2011, Hammamet, Tunisia
  8. R Khaldi, N. Benamrouche, M. Bouheraoua “An experimental investigation of heating in induction motors”, World Academy of Science, Engineering and Technology, WASET, Paris, France, 2012, 27-28 Iune, pp. 619-621
  9. N. Benyahia, N. Benamrouche, T. Rekioua, “Modelling and simulation of a stand- alone wind/photovoltaic/ Fuel cell system”.. ICEM’2012, Marseille France 3-5 septembre 2012.
  10. M. Zaouia, N. Benamrouche, A. Djerdir’ “ Study and analysis of an electromagnetic energy recovery damper” ICEM’2012, Marseille France 3-5 septembre 2012, pp. 2716-2721
  11. D.Hatem, MS. Belkaid, M.Pasquenelli “TiO2 Thin films prepared by APCVD for organic solar cells application”. TCM-2012, 4th International Symposium on Transparent Conductive Materials 21‐26 October 2012, Crete, Greece.
  12. K. Medjnoun, K.Djessas, M.S Belkaid., H.Mahdhi, Z. Ayadi. « ZnO:V thin films synthesized by RF-magnetron sputtering with high and low vanadium concentration used as buffer or window layer in solar cells”. TCM-2012, 4th International Symposium on Transparent Conductive Materials 21‐26 October 2012, Crete, Greece.
  13. L.Chibane, MS.Belkaid, M. Pasquinelli, H.Derbal-Habak, J-J. Simon, D.Hocine, O.Boudia. “Development of Molybdenum trioxide (MoO3) by spin coating method for photovoltaic application”. International Conference on Renewable Energies and Power Quality (ICREPQ’12) Santiago de Compostela (Spain), 28-30 March, 2012.
  14. D. Hocine, MS. Belkaid, M. Pasquinelli, L. Escoubas, J.J. Simon, G. Rivière, A. Moussi. “3% absolute efficiency gain on multicrystalline silicon solar cells by TiO2 antireflection coatings derived by APCVD process”. International Conference on Renewable Energies and Power Quality (ICREPQ’12), Santiago de Compostela (Spain), 28-30 March, 2012
  15. D.Hatem, M.S Belkaid, F.Nemmar, M.Pasquenelli, “ The influence of transparent electrodes choice in organic solar cells” . First Euro-Mediterranean Conference on Materials and Renewable Energies (EMCMRE-1), Marrakech, Morocco, November 21-25, 2011.
  16. D. Hocine, M. Pasquinelli, L. Escoubas, P. Torchio, A. Moreau, MS. Belkaid. ”Atmospheric Pressure Chemical Vapor Deposition and Characterization of TiO2 Antireflection Coatings for Monocrystalline Silicon Solar Cells”.International Conference on Clean Electrical Power (ICCEP 2011) 14-16 June 2011, Ischia, Italy.
  17. . D. Hatem, M.S. Belkaid, K. Medjnoun.,”The Influence of Transparent Electrode Choice in Organic Solar Cells”. PhotoVoltaic Technical Conference “ Thin Film & Advanced Solutions” 2011, May 25-27, 2011 , Aix-en-Provence (France).
  18. K. MEDJNOUN, MS. BELKAID, D. HATEM, O. BOUDIA, L. CHIBANE.”Thin layers of SnO2 deposited by Sol-Gel method : photovoltaic application”. XIIIème Congrès de la Société Française de Génie des Procédés (SFGP 2011) 29 nov-01 Dec 2011, Lille, France.
  19. R.Zirmi, A.Portavoce, P. Boullay, R. Delattre, D. Chateigner,.. MS. Belkaid, M.-C. Record “On the investigation of the HMS thin film formation and their structural characterization”. E-MRS 2011, spring Meeting May 9-13, 2011. Nice, France.
  20. L. Chibane, M.S. Belkaid , K. Medjnoun , O. Boudia « Élaboration du bisulfure de molybdène (MoS2) par la méthode de sol-gel pour une application photovoltaïque « . XIIIème Congrès de la Société Française de Génie des Procédés (SFGP 2011) 29 nov-01 Dec 2011, Lille, France
  21. K. Lagha , MS Belkaid, M. Pasquinelli, D. Barakel, L. Escoubas. « Annealing of ZnO and SnO2 transparent conductive oxides”.International Conference on Renewable Energies and Power Quality (ICREPQ’11). Las Palmas de Gran Canaria (Spain), 13-15 April, 2011.
  22. K.Lagha, MS. Belkaid, S.Maifi, M.Pasquinelli,D. Barakel, L. Escobas. « Propriétés des oxydes transparents SnO2 et ZnO obtenus par APCVD ». Dispositifs. Electroniques Organiques DIELOR 2010- Presqu’île de Giens, 11-13 Octobre 2010, France.
  23. K.Lagha, MS.Belkaid, S. Maifi, M.Pasquinelli,D. Barakel, L. Escoubas. « Tin Oxide in heterojunction solar cells ». Thin solid films 2010, 28-29 Mai 2010, Aix en Provence, France.
  24. MS. Belkaid, K. Lagha, S. Maifi, M. Pasquinelli, D. Barakel, O. Palais, L. Escoubas.”Comparison of physical and optical properties of SnO2 and ZnO antireflective layers deposited by APCVD”.European Energy Conference, 20-23 April 2010, Barcelona, Spain.
  25. D.Hocine, M, Pasquinelli, L ; Ecscoubas, P. Torchio, A. Moreau, M.S Belkaid. “Structural and optical study of titanium dioxide thin films elaborated by APCVD for application in silicon solar cells”. International Conference on Renewable Energy and Power Quality (ICREPQ’10), Granada, Spain, 23-25 march, 2010. Publié in : Renewable Energy and Power Quality Journal, N°8, april 2010 (ISSN 2172-038x).
  26. B.Yahiaoui, L. Dascalesco, A.Antoniu, B . Tabil, M.C Plopeanu, M. Megherbi, « AC Corona neutralisation of positively and négatively charged polypropylène non-woven fabrics » 8 ème conférence de la société française d’électrostatique, Cherbourg octvill, France 5_6 Juillet 2012.
  27. B. Yahioui, M. Megherbi, B. Tabo, A. Antoniu A. smaili, L. Dascatescu , « Distribution of electic potential at the surface of corona charged non woven fabrics after neutralization”,Electrostatic joint conference , Cambridge, Antario, Canada, June 12-14, 2012.
  28. H. DENOUN, N. BENAMROUCHE, S. HADDAD, S. MEZANI, A. AIT AMAR “ A DSP (TMS 3201f2407) based implementation of PWM for single phase ac/dc bipolar converter with a unity power factor”, International Conference on PLASMA- FUSION – NUCLEAR PHYSICS (IPLAFUN ’11). Cambridge, UK, February 20-22, 2011.www.wseas.us/conferences/201…
  29. Fazia Boumedine, Slimane Oussalah, Mohammed Said Belkaid « Modelisation of current voltagestatic characteristics of MOS structures », 2009 6th International multi-conference on systems signals and devices, Tunisia.http://www.ssd-conf.org/ssd09
  30. Sadia Maifi, Kahina Lagha, Fazia Boumedine, Mohammed Said Belkaid « M-I-S-S Structure Based Silicon and TCO », 2009 4th International conference on Design and Technology of Integrated Systems in Nanoscale Era, April 6-8 , 2009, Cairo, Egypt. http://www.dtis09.org
  31. M.A. Shrud, A. Bousbaine, A. El Azreg, N. Benamrouche « analysis and simulation of a 42V power system for automotive applications », UPEC, 2009, 1-3 September, Glasgow, UK.
  32. A. Bousbaine, G. Trigkidis, N. Benamrouche « An integrated electro-thermal model of IGBT devices, experimental validation », UPEC, 2009, 1-3 September, Glasgow, UK.
  33. A. Bousbaine, G. Trigkidis, N. Benamrouche « An integrated electro-thermal model of IGBT devices, experimental validation », UPEC, 2009, 1-3 September, Glasgow, UK.
  34. M. Zaouia, N. Benamrouche, M. Rachek, A. Djerdir « Electromagnetic mechanical dynamical modelling of permanent magnet linear stepping motor with material saturation effect », ISEF 2009, 10-12 Septembre, Arras, France.
  35. N. Habani, N. Benamrouche, Lh Arab « Torque Maximisation of Synchronous Reluctance Motor by Modifief LQ Method », International Conference on Electrotechnics, ICEL’09, November 10-11, 2009, Oran, Algeria.
  36. M. Moudoud, M. Megherbi, O. Lamrous « Thermal aging effect on charging and discharging current under DC stress », International Symposium on Electrical Insulartion, ISEI 2008. Ieeexplore.ieee.org/iel5/4544566/4570258/045703383.pdf ?arnumber
  37. M. Zaouia, N. Benamrouche, M. Rachek, S. Haddad « analysis and improvement of dynamic performances of a tubular linear stepping motor by additional permanent magnet », ICEL’08, Villamoura, Portugal, 6-8 september, 2008.
  38. M. Zaouia, N. Benamrouche, M. Rachek « Improvement of dynamic performances of a tubular linear stepping motor », 2eme ICEEDT’08, Hammamet, Tunisia, 8-10 November, 2008.
  39.  D. Hocine, M.S. Belkaid « Effects of interfacial oxide layer thickness and interface states on conversion efficiency of SnO2/SiO2/Si(N) solar cells” International conference on Renewable Energy and Power Quality, ICREPQ’08, 12-14 March 2008, Santander, Spainwww.icrpq.com/icrpq08/progra…
  40. R. Zirmi, M.S. Belkaid, Y. Belaroussi, A. Chenna, H. Tahi « Effet des ultrasons sur le dépôt de Nickel sur silicium par voir électrochimique », journées annuelles de SF2M, 4-6 Juin 2008, Paris, France.www.sf2m.asso.fr/japrogramme…