Publications Scientifiques

Nous donnons ci-dessous les publications dont au moins un auteur est affilié au LEC2M (prière de signaler toute erreur/manque/correction à l’adresse email lec2m@ummto.dz ) :

2019

  • Metallurgical phase transformation and behaviour of steels under impact loading. Metallurgical and Materials Transactions A (Springer), **(**), pp **–**, 2019. https://doi.org/10.1007/s11661-019-05527-z
  • Effect of chemical treatment of Alfa natural fibers on the mechanical properties of polyethylene matrix composites. U.P.B. Sci. Bull., Series B (ISSN 1454-2331), Vol. 81(2), pp. 115-122, 2019. https://www.scientificbulletin.upb.ro/rev_docs_arhiva/rez660_633231.pdf
  • Numerical assessment of the load transfer in steel coupling beam-reinforced concrete shear wall connection. Asian Journal of Civil Engineering (Springer), Vol. 20(1), pp 35–47, 2019. http://dx.doi.org/10.1007/s42107-018-0086-4
  • Transport properties of Ce-doped nickel oxide and relevance on the thermal growth of oxide scales on CeO2-coated nickel. Solid State Ionics. Volume 339, 15 October 2019, 114943. https://doi.org/10.1016/j.ssi.2019.04.006
  • Degradation of Polycarbonate Properties Under Thermal Aging. J Fail. Anal. and Preven (2019). https://doi.org/10.1007/s11668-019-00630-0
  • Cobalt aluminide synthesis by SHS reaction and its application as reinforcement of copper matrix composites. U.P.B. Sci. Bull., Series B, Vol. 81, Iss. 1, 2019.
  • Finite element model updating using Lagrange interpolation. Mechanics and Mechanical Engineering, vol. 23(1) 2019, 228-232. https://doi.org/10.2478/mme-2019-0030

2018

  • Relevance of incorporating cavity shape change in modelling the ductile failure of metals. Mathematical Problems in Engineering. Vol.(2018), Article ID 6454790, 9 pages, 2018. https://doi.org/10.1155/2018/6454790
  • Numerical Modeling of an Elastic Spherical Contact under Combined Normal and Tangential Loading. Nature & Technology, Vol. A: Sciences fondamentales et Engineering, N° 18, 2018, pp. 71 à 76.
  • Synthesis of Metallic and Intermetallic Matrix Composites Reinforced by Alumina by Reaction in NiO/Al Mixtures. Transactions of the Indian Institute of Metals, March 2018, Volume 71, Issue 3, pp 727–736. https://doi.org/10.1007/s12666-017-1205-8
  • Experimental and numerical study of the mechanical behavior and kinetics of the martensitic transformation in 304L TRIP steel: applied to folding; The International Journal of Advanced Manufacturing Technology ,Volume 97, Issue 5–8, pp 2757–2765; 2018. https://doi.org/10.1007/s00170-018-2154-z
  • Ductile Fracture Study of Stainless Steel AISI 304L Thin Sheets Using the EWF Method and Cohesive Zone Modeling ; Journal of Failure Analysis and Prevention, (2018). https://doi.org/10.1007/s11668-018-0507-4
  • Structural and Mechanical Properties of Arc-Sprayed Ni-Cr Coating Post-TreatedbySurface Mechanical Attrition Treatment (SMAT). Coatings 2018, 8(12), 424. https://doi.org/10.3390/coatings8120424
  • Damage and Behavior of AlSi7ZnMg Alloy in Traction and Shock. Scientific Bulletin-University Politehnica of Bucharest, Series D, vol. 80(2) 2018, pp. 197-212.
  • Uncertainties estimation in identification of digital planar surface parameters using a 3D laser sensor.International Journal of Quality Engineering and Technology, vol. 7(1) 2018, pp. 82-97. https://doi.org/10.1504/IJQET.2018.10015969

2017

  • Design optimization and material selection of acetabular component of hip prosthesis using computational concepts. Computer Methods in Biomechanics and Biomedical Engineering 20(1), pp. 131-132 · October 2017. http://dx.doi.org/10.1080/10255842.2017.1382896
  • Innovative solution for strength enhancement of metallic like-composite tubular structures axially crushed used as energy dissipating devices. Journal Thin-Walled Structures (Elsevier), Vol. 119, p. 332–344, 2017. http://dx.doi.org/10.1016/j.tws.2017.06.024
  • Implementation and Validation of a Damage-Friction Constitutive Model for Concrete. International Science Index, Civil and Environmental Engineering (eISSN:1307-6892), Vol:11(12), p. 2088, 2017. http://dai.waset.org/1307-6892/77318
  • Material selection process for femoral component of hip prosthesis using finite element analysis and ranking method. Computer Methods in Biomechanics and Biomedical Engineering 20(1), pp. 133-134. October 2017. http://dx.doi.org/10.1080/10255842.2017.1382897
  • Nouvelle technique de ferraillage des poteaux couplés à voiles par introduction d’un accélérogramme sismique. Nature & Technology, Vol. A: Sciences fondamentales et Engineering, N° 17/ juin 2017, pp. 17 à 23.
  • Evidence for Symmetry Reduction in Ti3(Al1−δCuδ)C2 MAX Phase Solid Solutions. Inorg. Chem. 2017, 56, 14388 − 14395. https://doi.org/10.1021/acs.inorgchem.7b01003
  • Synthesis and characterization of a new (Ti1-ε,Cuε)3(Al,Cu)C2 MAX phase solid solution. Journal of the European Ceramic Society, Volume 37, Issue 2, February 2017, Pages 459-466. https://doi.org/10.1016/j.jeurceramsoc.2016.09.028
  • Recycling of waste tire rubber: Microwave devulcanizationand incorporation in a thermoset resin. Waste Management 60 (2017) 471–481. https://doi.org/10.1016/j.wasman.2016.10.051
  • UV radiations effects on the mechanical and physicochemical properties of a polycarbonate. Journal of Materials, Processes and Environment; May edition. Vol.5. No1. (2017)
  • Finite element and isogeometric correlation analysis using modal assurance criterion. Mechanika, vol. 23(1) 2017, pp. 132-137. http://dx.doi.org/10.5755/j01.mech.23.1.13890
  • Elastic characterization by Ultrasonic waves of the unstandardized polycrystalline alloy 42500. Journal of Materials and Engineering Structures, vol. 4(2) 2017, pp. 87-97.

2016

  • On the numerical simulation of damage for the visco-hyperelastic anisotropic behavior of the biomaterials in cyclic loading: relationship of the Mullins effect and fibers reinforcement. Procedia Engineering (Elsevier), Vol. 101, pp. 126–134, 2015. http://dx.doi.org/10.1016/j.proeng.2015.02.017
  • The Rousselier model implementation for a dynamic explicit analysis of the ductile fracture. Nature & Technology, A- Sciences fondamentales et Engineering, N° 15, 2016, pp. 31 à 36.
  • Modeling and simulation of the damage viscoplastic behavior of steel AISI 304. Nature & Technology, A- Sciences fondamentales et Engineering, N° 15, 2016, pp. 37 à 44.
  • Effect of initial porosity size on the fracture toughness of metallic materials, U.P.B. Sci. Bull., Series D, Vol. 78, Iss. 4,  ISSN 1454-2358, 2016
  • Elaboration et Caractérisation du Composite Aluminium – Particules du carbure de silicium (Al-SiCp) ; EL MIR’AT SCIENCES, septembre 2016 ; ISSN 2170-1555, PP36-41

2015

  • Damage modelling in thermoplastic composites reinforced with natural fibres under compressive loading. International Journal of Damage Mechanics, vol. 24(8), pp.1239-1260, 2015. http://dx.doi.org/10.1177/1056789515573900
  • Filler Elastomers Abrasion at Steady State: Optimal Use Conditions. International Science Index, Mechanical and Mechatronics Engineering (eISSN:1307-6892), Vol:9(10), p.932, 2015. http://dai.waset.org/1307-6892/25969
  • Numerical Investigation For Ductile Fracture Of An Aluminum Alloy 6061 T- 6: Assessment Of Critical J-Integral. International Science Index, Chemical and Molecular Engineering (eISSN:1307-6892), Vol.9(7), p. 831, 2015. http://dai.waset.org/1307-6892/26204
  • Experimental Modeling of Wear Behavior of Filled Elastomer SBR under Dry Friction-Influence of Roughness. Key Engineering Materials, Trans Tech Publications. Vol. 640, pp 13-20, 2015. http://dx.doi.org/10.4028/www.scientific.net/KEM.640.13
  • Transport properties of Al or Cr-doped nickel oxide relevant to the thermal oxidation of dilute Ni-Al and Ni-Cr alloys. Solid State Ionics. Volume 297, 1 December 2016, Pages 13-19. https://doi.org/10.1016/j.ssi.2016.09.023
  • Ni-Coated SiC Particles: Synthesis and Densification. Journal of the American Ceramic Society, Volume98, issue12, December 2015, Pages 4058-4065. https://doi.org/10.1111/jace.13763
  • Devulcanization of styrene butadiene rubber by microwave energy: Effect of the presence of ionic liquid. eXPRESS Polymer Letters Vol.9, No.12 (2015) 1076–1086. https://doi.org/10.3144/expresspolymlett.2015.97
  • Hypereutectoid steel coatings obtained by thermal flame spraying – Effect of annealing on microstructure, tribological properties and adhesion energy. Surface and Coatings Technology, Volume 263, 15 February 2015, Pages 86-99. https://doi.org/10.1016/j.surfcoat.2014.12.001

2014

  • Distribution of Non Liner Relaxation (DNLR) approach of the annealing effects in semicristalline polymers. Structure-property relation for High Density Polyethylene (HDPE). Continuum Mechanics and Thermodynamics (Springer), Vol. 26(3), pp. 373-385, 2014. http://dx.doi.org/10.1007/s00161-013-0306-9
  • Thermodynamic and transport properties of Ca-doped nickel oxide and relevance to the oxidation of CaO-coated- nickel. Solid State Ionics. Volume 261, August 2014, Pages 117-124. https://doi.org/10.1016/j.ssi.2014.04.011
  • Analysis of annealing effect and macroscopic triaxiality on high density polyethylene; U.P.B. Sci. Bull., Series B, Vol. 76, Iss. 2, 2014 ; ISSN 1454 – 2331
  • Mechanical Property and Microstructural Characterization of AISI 304L: Application Spot Welding.   ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis; Volume 3: Engineering Systems; Heat Transfer and Thermal Engineering; Materials and Tribology; Mechatronics; Robotics. https://doi.org/10.1115/ESDA2014-20379
  • Measurement Points selection strategy to update models in frequency domain. Journal of Materials and Engineering Structures, vol. 1(1) 2014, pp. 22-31.

2013

2012

  • The thermal ageing effect on viscoplastic behaviour of High Density PolyEthylene (HDPE). American Society of Mechanical Engineers (ASME). Vol. 3, pp. 51-56. 2012. http://dx.doi.org/10.1115/ESDA2012-82548

2011

  • Numerical and experimental study of ductile fracture of an aluminium alloy during forging process. Proceeding of CMM-2011-Computer Methods In Mechanics. Edited by A. Borkowski, T. Lewinski and G. Dzierzanowski, Publishing House of the Warsaw University of Technology (ISBN: 978-8372079435), pp. 393-394 (full paper: 8 pages), 2011.
  • Fracture characterization of ST37-2 thin metal sheet with experimental and numerical methods. Key Engineering Materials, Trans Tech Publications. 473, pp. 396-403, 2011. http://dx.doi.org/10.4028/www.scientific.net/KEM.473.396
  • Micromechanical and phenomenological approaches of the sheet folding process. Procedia Engineering (Elsevier), Vol. 10, pp. 3359–3368, 2011. http://dx.doi.org/10.1016/j.proeng.2011.04.554
  • Modelling of thermal ageing effect on the elastic-viscoplastic behaviour of semi-cristallin polymers by D.N.L.R approach. Procedia Engineering (Elsevier), Vol. 10, pp. 1815–1822, 2011. http://dx.doi.org/10.1016/j.proeng.2011.04.302
  • Damage detection by updating using correlation functions. Scientific Bulletin-University Politehnica of Bucharest, Series D, vol. 73(1) 2011, pp. 31-42.

Publications antérieures à 2011

  • Micromechanical modeling of the rolling of a A1050P aluminum sheet ». International Journal of Material Forming, Vol. 2, Issue1, 2009, pp 25-36. http://dx.doi.org/10.1007/s12289-008-0387-3
  • Comparison of explicit and implicit finite element simulations of void growth and coalescence in porous ductile materials. Materials & Design, Vol. 29, Issue 2, 2008, pp. 319-329. http://dx.doi.org/10.1016/j.matdes.2007.02.003
  • Multiscales Modeling Of Microstructure Evolution During Asymmetric Cold Rolling Process. International Journal of Material Forming, 2008, Volume 1, Supplement 1, Pages 89-92. http://dx.doi.org/10.1007/s12289-008-0039-7
  • Dynamic explicit cell model simulations in porous ductile materials, Fracture of nano and engineering materials and structures, E.E. Gdoutos Editor, 403-404 (full paper: 8 pages), 2006. http://dx.doi.org/10.1007/1-4020-4972-2_199
  • Numerical studies of softening due to second population of cavities in metals ». Local approach to fracture, Edited by Jacques BESSON. Presses de l’Ecole des Mines de Paris (ISBN10: 291176255X; ISBN13: 978-2911762550), 453-458, 2006.
  • Study on the neoprene degradation under combination effect of oven ageing and fatigue. Sciences & Technologie B, N°28, 2008, pp 39-42.